Skip to content
Jefferson Lock & Key Co.Request a visit
Open 24/7(289) 802-6293Call now
Person touching the sliding metal bolt on a wooden garden gate. — Gate & Building Entry Locks, Aurora

Change or rekey · Aurora

Gate & Building Entry Locks in Aurora

The gate to the side yard used to close with a satisfying click. After a winter of frost heaving the fence post, the latch now sits a full inch below where the strike is waiting for it, and the gate swings free no matter how hard it is pulled shut.

Call now · open 24/7(289) 802-6293

Request a visit

In plain words

Hardware bolted to a gate or an exterior building door lives outside every day of the year, which is a different job from a lock tucked behind a storm door. This service treats that exposure as the starting point: cylinders rated for weather, fasteners that resist road salt, and a closer set up to keep working through a freeze-thaw cycle rather than seizing at the first cold snap. The result is a gate or entry that keeps operating through the season it is most likely to struggle in.

Sound familiar?

The driveway gate drags a groove into the gravel every time it swings, and the latch stopped catching weeks ago. Now it sits propped shut with a brick, waiting for anyone to walk through and forget to prop it back.

How the visit goes

Gate & Building Entry Locks · Aurora

How the visit goes

Technician in a cap working a screwdriver at a steel lock plate on a navy door, with an open tool bag behind. — Aurora
  1. 1

    Checking the closer and hinges together

    A closer cannot be judged on its own, because a gate that slams or drifts open is often fighting hinges or a post that have moved. The locksmith checks the closer's current adjustment, the condition of its arm and fittings, and then the hinges or pivots the gate hangs from, along with whether the post itself still stands square. Separating a closer problem from a hinge or post problem here avoids replacing a perfectly sound closer that was only ever fighting a leaning post, or the reverse case.

  2. 2

    Coordinating keys across a shared entry

    On a property with several gates or a shared building entry, the cylinders that should open on one key are brought onto a common pinning during the same visit, rather than one at a time as complaints come in. Current residents or unit holders each receive a key that matches every door they are meant to use, and a short list is kept of which key opens what. Any gate meant to stay on its own separate key, such as a utility gate the property manager alone uses, is deliberately left off the shared system.

  3. 3

    A record for the owner or property manager

    You leave with a plain account of what changed: which cylinders were rekeyed or replaced, how many new keys were cut and to whom, whether any gate was brought onto a shared key or deliberately kept separate, and what was adjusted on the closer, strike or post. For a rental or a condo, this note is worth passing to whoever manages the building, since it settles later questions about who currently holds a working key without anyone having to guess or ask around.

In the van

  • Cylinder decoder and pick set
  • Dry graphite or PTFE lubricant
  • Corrosion-resistant fasteners
  • Gate locks and latches
  • Key blanks and code cutter

What affects the quote

  1. 1

    Weather-rated versus standard hardware

    Hardware built and sealed for outdoor exposure differs from standard indoor-grade hardware, and choosing the weather-rated option for anything mounted outside is reflected in the parts portion of the quote.

  2. 2

    Any upgrade chosen while the locksmith is already there

    Some property owners use the visit to move to a heavier closer, an electric strike, a master key system or additional padlocks for other gates. None of this is required to address the original problem; each option is priced as a separate line.

  3. 3

    Whether the post or frame needs correction

    When the underlying cause is a leaning post or a shifted frame rather than the lock itself, resetting, packing or bracing that structure is quoted as its own item alongside the lock work.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(289) 802-6293

Gate & Building Entry Locks: questions

Advice · (289) 802-6293

What is the difference between a gate lock and a regular door lock?

A gate lock is built to work outdoors, so it usually pairs a latch or bolt with a closer that swings the gate shut on its own using its own spring, rather than relying on a person to push it home. The cylinder tends to be weather-rated, and the whole assembly fits a gate frame or post rather than a conventional door jamb. A building entry door, by contrast, often combines this outdoor hardware with an interior-style latch or an electric strike.

Should every gate on my property share one key, or is it better to keep them separate?

Either can make sense, and the choice usually comes down to who uses which gate and how often. A household that walks through the front and side gates daily generally prefers one key for both, while a gate that only a landscaper or utility worker uses is sometimes kept on its own key deliberately, so lending it out does not hand over access to everything else. The locksmith can lay out both options once every gate on the property has been looked at.

Does this service cover the gate itself, or only the lock?

Both, where the two are connected, which on a gate they usually are. A locksmith working on a gate lock also looks at the hinges, the post and the closer, since a lock rarely fails on its own when the real cause is a sagging gate or a post that has shifted. Work that goes beyond hardware the locksmith carries, such as rebuilding a rotted post or a damaged fence panel, is flagged so it can be handled by whoever normally does that kind of repair.

York, Ontario

Aurora information

Town
Aurora, York, Ontario
In business
13 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

22%

Newer homes. About 22% of homes in Aurora were built in 1980 or earlier, according to the 2021 Census.

Households in newer homes are often keen on keypads, fobs and phone-controlled locks. Standard doors make installation straightforward, and the locksmith spends more of the visit setting codes and pairing devices than on carpentry.

60%

Mostly houses. Single-detached houses make up about 60% of homes in Aurora (2021 Census).

Garage entry doors on detached houses are often the household's real front door, used more than the formal entry. They deserve the same quality of lock, and keying them alike with the house means one key does the whole daily routine.

Source: Statistics Canada, 2021 Census of Population

Open Aurora in Google Maps

Open 24/7

Request a visit

The gate to the side yard used to close with a satisfying click.

Call now · open 24/7(289) 802-6293
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 13 years in business